mcDSA-FS40-Modul

Articlenumber: 1516009


mcDSA-FS40-Modul
Motor controller up to 20 A
Compact four-quadrant controller for Stepper motors
CAN Interface (protocol DS301, Device profile DS402)
integrated digital inputs
integrated analog inputs
Overvoltage, undervoltage and overtemperature monitoring
Easily programmable due to built-in MPU (Motion Process Unit)
NameValue
Supply voltages
     Electronic current consumption@ Ue=24V235 mA
     Electronic supply voltage Ue19 .. 30 V
     Power supply voltage Up39 .. 60 V
    
Output current
     Continuous output current @ Up=24V47 A
     Continuous output current @ Up=48V46 A
     Max. output current20 A
    
PWM
     Commutation typeField Oriented Control
     Output voltage85% Up
     PWM frequency25, 32, 505 kHz
     PWM modesymmetrical
    
Motor types
     BLDC motorsno
     DC motorsno
     Linear motorsno
     Stepper motorsyes
    
Mechanical
     AssemblyBackplane
     ConnectorsPin header
     Size LxWxH97 x 71 x 12 mm
     Weight55 g
    
CAN bus
     Galvanically isolatedno
     CAN specification2.0B
     Max. baudrate1 Mbit/s
     Device profileDS402
     ProtocolDS301
    
Digital inputs
     High voltage6 .. 30 V
     Low voltage-30 .. 5 V
     Number4 (Din0..3)
    
Analog inputs
     Number2 (Ain0..1)
     Signal type - Ain0..10 V, 12 Bit, single ended
1No reverse polarity protection, the destruction limit is at overvoltage of >= 33V or short-term peak voltage of 37V < 1s
2power amplifier switched off, 5V output (sensor supply) is free
3No reverse polarity protection, the destruction limit is at overvoltage of >= 80V
4connector cable with max. possible cable cross-section, PWM frequency 32 kHz, ambient temperature 40 °C (t >40 °C derating), RMS current: 7 A → 5.7 Aeff, 6 A → 4.9 Aeff
no guarantee, since value is determined empirical, please consider the application notes to determine the continuous current
5default value
Datasheet
mcManual 🔒
2D/3D-Drawing 🔒
mcPLC 🔒