mcDSA-B45-Lp
Article number: 1504943 Category: Servo amplifier |
![]() Picture similar |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Features
- Motor controller up to 50A
- Compact four-quadrant controller for: DC motors, BLDC motors
- CAN interface (Protocol DS301)
- integrated digital inputs
- integrated digital outputs
- integrated analog inputs
- Overvoltage, undervoltage and overtemperature monitoring
- Device status notification with the help of 3 LEDs (Power, Status, Error)
- Easily programmable due to built-in MPU (Motion Process Unit)
Technical data
Name | Value |
---|---|
Absolute maximum rating (destruction limits) | |
- Power supply voltage Up
no polarity reversal protection |
80 V |
- Continuous Electronic supply voltage Ue
no polarity reversal protection |
33 V |
- Short term peak voltage < 1s Ue
no polarity reversal protection |
37 V |
Power | |
- Electronic supply voltage Ue | 9..30 V |
- Power supply voltage Up | 9..60 V |
- Max. output current | 50 A |
- Continuous output current @ Up=24V*1 | 10 A |
- Continuous output current @ Up=48V*1 | 8.5 A |
PWM | |
- Output voltage | 100% Up |
- PWM frequency | 12.5, 25*2 kHz |
- PWM mode | symmetrical |
Motor types | |
- DC motors | yes |
- BLDC motors | yes |
- Linear motors | no |
- Stepper motors | no |
Mechanical | |
- Size LxWxH | 97 x 73 x 14 mm |
CAN bus | |
- Protocol | DS301 |
- Galvanically isolated | no |
Sensor supply (Hall) | |
- Output voltage | 5 V |
- Max. output current | 0.2 A |
Hall sensors | |
- Input voltage (24V tolerant) | 0..5 V |
- Signal type | open collector, differential, 5V pull up intern 920 Ohm |
Digital inputs | |
- Number - digital inputs | 4 (Din0..3) |
Digital outputs | |
- Number | 1 (Dout0) |
- Continuous output current | 1.5 A |
Analog inputs | |
- Number | 1 (Ain0) |
- Signal type | +/- 10 V, 12 Bit, single ended |
Modifications and errors excepted.
*1 connector cable with max. possible cable cross-section, PWM frequency 25 kHz, ambient temperature 40 °C (t >40 °C derating), RMS current: 8.5 A → 6.9 Aeff, 10 A → 8.2 Aeff
no guarantee, since value is determined empirical, please consider the application notes to determine the continuous current
*2 default value
Cross references
- mcDSA-B40
- mcDSA-B40-HC
- mcDSA-B40-Modul
- mcDSA-B45
- mcDSA-B45-HC
- mcDSA-B45-Modul
Devices from the same family:
Downloads
- Data sheet: mcDSA-B45-Lp_en.pdf
- Documentation: mcManual
- 2D, 3D drawings: mcDSA-B45-Lp.zip
- Configuration software: mPLC Setup
Document Actions